Makita DLX7034T 18V 5.0Ah LXT Li-ion Cordless Brushless 7pce Combo Kit

 1 x Makita DHP486Z 18V Li-Ion Cordless Brushless Heavy Duty Hammer Driver Drill - Skin Only
The 18V Brushless Hammer Driver Drill (DHP486) provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

Features:

Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
Compact overall length only 178mm for use in narrow workspaces
High powered brushless motor produces 141Nm peak torque
High durability aluminum gear housing
Mechanical 2 speed gearing with all metal gear construction
Specifications:

Voltage: 18V
Max Drilling Capacities in Wood:
Auger Bit: 50mm
Self-feeding Bit: 76mm
Hole Saw: 152mm
Max Drilling Capacities in Steel: 13mm
Max Drilling Capacities in Masonry: 16mm
No Load Speed: 
Hi: 0 - 2100rpm
Lo: 0 - 550rpm
Impact Rate:
Hi: 0 - 31500ipm
Lo: 0 - 8250ipm
Max Peak Torque: 141Nm
Max Tightening Torque: 
Hard: 130Nm
Soft: 65Nm
Dimensions (L x W x H): 320mm x 130mm x 205mm
Weight: 2.1kg
Warranty:

3 Years Warranty Covered by Makita
5 Years Extended Warranty via registration through Makita within 30 days of purchase

 1 x Makita DTD154Z 18V 4-Mode - Li-ion Cordless Brushless Impact Driver - Skin Only
The Makita DTD154Z Brushless Impact Driver has a high rotational speed of 3,600rpm, which is optimum for fast tightening of self-drilling screws. Featuring an aluminium hammer case, variable speed control and one-touch bit installation, this is a powerful and compact drill to suit any line of work. It also features electronic 3-stage impact power selection and the new T-Mode especially for tightening self-drilling screws.

Features:

Aluminium hammer case
One-touch bit installation, no need to pull bit sleeve for bit installation
Twin LED job light with pre-glow and afterglow functions
High rotation speed at 3600rpm
Variable speed controlled by trigger
Ergonomically designed handle with soft grip provides comfortable grip and more control while minimising hand fatigue and pain
Electronic 3-stage impact power selection - in order to reduce fault tightening, hard/medium/soft impact power can be selected to the material of workpiece or screw type simply by pushing a button
T-Mode is a special mode optimum for fast tightening of self drilling screws without damaging the screw and workpiece
Specifications:

Voltage: 18V
Capacity:
Machine screw: M4 - M8
Standard bolt: M5 - M16
High strength bolt: M5 - M14
Coarse thread (length): 22mm - 125mm
Impacts per minute:
Speed 1: 0 - 3800ipm
Speed 2: 0 - 2600ipm
Speed 3: 0 - 1100ipm
No load speed:
Speed 1: 0 - 3600rpm
Speed 2: 0 - 2100rpm
Speed 3: 0 - 1100rpm
Max fastening torque: 175Nm
Vibration level: 12.5m/s²
Sound pressure level: 96dB(A)
Sound power level: 107dB(A)
Dimensions (L x W x H): 117mm x 79mm x 236mm
Weight: 1.2kg
Warranty:

3 Years Standard Warranty Covered By Makita
5 Years Extended Warranty via registration through Makita within 30 days of purchase

 1 x Makita DGA504Z 18V Li-ion Cordless Brushless 125mm (5") Angle Grinder - Skin Only
Features:

Easy to hold grip design with rubber for anti-skid
Worlds deepest concrete cutting mobile angle grinder at a depth of 20mm
Excellent performance - as powerful as AC model
Gear housing can be rotated to suit most cutting and grinding applications
Automatic speed control changes the cutting speed according to load condition for an optimum operation
Removable dust cover
Anti-restart function prevents accidental startup for safety even if the machine is plugged to powersource with the lock-on switch on
Extreme protection technology for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
Specifications:

Voltage: 18V
Wheel diameter: 125mm
No load speed: 8,500rpm
Dimensions (L x W x H): 362mm x 140mm x 145mm
Weight: 2.0kg
Warranty:

3 Years Warranty Covered By Makita
5 Years Extended Warranty via registration through Makita within 30 days of purchase

 1 x Makita DHS680Z 18V LXT Li-Ion 165mm (6-1/2") Brushless Cordless Circular Saw - Skin Only
The new Makita 18V Circular Saw DHS680Z features a powerful brushless DC motor, making it out preform previous models with durability and performance. Compatible with all 18V batteries, its compact and lightweight design makes it the ideal circular saw for any jobsite or DIY handyman.

Features:

Powerful Brushless DC motor (BLDC)
Automatic Torque Drive; automatically increases motor torque according to load conditions
Magnesium base with 45 and 50 degrees bevel cutting capacity
Compact and lightweight design
Rear dust exhaust port
Twin LED job light with pre-glow
LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
Tool hanger for hanging on a ladder or rafter
Large lock off lever easily operated even with a gloved hand
Compatible with all 18V Li-ion Batteries
Specifications:

Voltage: 18V
No Load Speed: 5,000rpm
Bevel Capacity: 50º
Blade Diameter: 165mm
Max Cutting Capacities:
0º: 57mm
45º: 41mm
50º: 37mm
Weight: 3.3kg
Length: 350mm
Warranty:

3 Years Standard Warranty Covered By Makita
5 Years Extended Warranty via registration through Makita within 30 days of purchase

 1 x Makita DHR242Z 18V Li-ion SDS Plus Brushless Rotary Hammer Drill - Skin Only
These genuine Makita 18 Volt Rotary Hammer drills from the LXT range feature a Brushless DC Motor which helps reduce energy loss by 30% compared to that of a 'brushed' rotary hammer. The one-touch sliding SDS plus chuck ensures easy bit changing. A 3 mode operation system makes these rotary hammers a must have the serious trades person. The angle positioning mechanism allows a chisel bit to rotate a full 360 degrees with 40 different locking positions makes this tool is as versatile as it is tough. Also features variable speed trigger, torque limiter, ergonomic & comfortable handle, and vibration absorbing design.

Features:

Brushless DC motor helps to reduce energy loss by 30%
One touch sliding SDS Plus type chuck
Variable speed control by trigger
Torque limiter
Easy to grip handle ergonomically designed to provide a sure and comfortable grip in any application
Natural position on mode selector provides 40 different bit angle settings
3 mode operation:- Rotation+Hammering, Hammering only, Rotation only
Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures
The tool body is separated into the upper and lower housings with vibration absorbing cushion rubbers
Specifications:

Voltage: 18V
Drive shank: SDS Plus
Impact rate: 0  -4700ipm
Joules: 2.0J
No load speed: 0 - 950rpm
Max capacity:
Concrete: 24mm
Steel: 13mm
Wood: 27mm
Vibration: 13.5m/s²
Length: 328mm
Weight: 3.3kg
Warranty:

3 Years Warranty Covered by Makita
5 Years Extended Warranty via registration through Makita within 30 days of purchase

 1 x Makita DJR189Z 18V LXT Li-ion Brushless Cordless Compact Recipro Saw - Skin Only
The 18V brushless reciprocating saw (DJR189) has a lightweight and compact design to enhance workability in tight places. The DJR189 features a loop shaped handle to enhance housing rigidity, improve cutting efficiency, and minimise the chance of injury. The handle can be gripped one-handed and is positioned to allow firm transmission of force to the workpiece where it may be difficult to exert force on the blade such as in tight places.

The DJR189 is also fitted with a unique counterweight mechanism to reduce tool vibration meaning users experience lower fatigue. The DJR189 also comes standard with several other features, including electric brake for safety, LED job light to enhance visibility, eXtremeProtection Technology (XPT) for increased dust and water resistance, and a fixed type pivoting shoe plate. The DJR189 is the perfect solution where jobs require a lightweight and compact reciprocating saw.

Includes:

1 x 152mm Metal Blade
1 x 205mm Wood Blade
1 x 152mm Multi Material Blade
Features:

Compact design for increased maneuverability and single hand use
Low vibration thanks to counterweight ensures comfortable prolonged use
22mm stroke length at 3,100spm produces rapid cutting speeds
XPT technology – advanced protection against dust and moisture
One touch tool-less blade clamp
Specifications:

Voltage: 18V
Strokes per minute: 0 - 3,100spm
Max Cutting in Wood: 255mm
Max Cutting in Pipe: 130mm
Length of Stroke: 22mm
Weight: 1.9kg
Warranty:

3 Years Warranty Covered By Makita Australia
 

 1 x Makita DUB185Z 18V Li-Ion LXT Cordless Blower - Skin Only
Lightweight and powerful, the DUB185 is perfect for cleaning up after any job. The improved 3 stage air volume settings and variable speed trigger provides the user with maximum control for the job at hand. Providing maximum air speeds of 352km/h and air volumes of 3.2m³/min coupled with its lightweight design, perfect for all day use.

Features:

Increased air volume with 3.2m³/min
3 stage air volume settings & variable speed trigger for maximum control
Wind speeds of up to 352km/h for higher blowing efficiency
Ultra lightweight at just 2.1kg
Specifications:

Voltage: 18V
Length: 517mm
Power output: 0 –18,000RPM
Max air volume: 352km/h
Max velocity: 187km/h
Dimensions (L x W x H): 280mm x 175mm x 215mm
Weight: 1.6kg
Warranty:

3 Years Warranty Covered By Makita
5 Years Extended Warranty via registration through Makita within 30 days of purchase

 1 x Makita DC18RC (195589-2) 18V Li-Ion Cordless Battery Fast Charger
Features:

Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Specifications:

Voltage: 18V
Cell capacity: 1.5Ah - 6.0Ah
Charge Time: 
1.5Ah: 15mins
3.0Ah: 22mins
4.0Ah: 36mins
5.0Ah: 45mins
6.0Ah: 55mins
Length: 185mm
Weight: 0.82kg
Warranty:

2 Years Warranty Covered By Makita

 2 x Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge
The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no useage.

Features:

Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Up to 66% more run time per charge compared to BL1830
Fast 45 minute charging time
Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
Specifications:

Voltage: 18V
Amp hour: 5.0Ah
Cell type: Lithium-Ion
Charging time: 45 minutes
Weight: 0.6kg
Warranty:

2 Years Warranty Covered by Makita