POLINOX non-woven mounted grinding wheel PNL dia. 60x50 mm shank dia. 6 mm A280

POLINOX non-woven mounted grinding wheel PNL dia. 60x50 mm shank dia. 6 mm A280

$28.50
Quantity:
Pickup available at Hurrell Way Store Usually ready in 4 hours

POLINOX non-woven mounted grinding wheel PNL dia. 60x50 mm shank dia. 6 mm A280

Hurrell Way Store

Pickup available, usually ready in 4 hours

38A Hurrell Way
Rockingham WA 6168
Australia

+61895286400
Description

POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are arranged radially. A long tool life is achieved through the dense packing of the flaps. The tool is particularly used for surface work.

Advantages
  • Highly flexible, enabling optimal adjustment to the contour.
  • Cool grinding and low thermal load on the workpiece.
  • The open structure and high flexibility of the non-woven material prevents tool clogging.
Recommendations for use
  • For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
Safety notes
  • The maximum permitted peripheral speed is 32 m/s.
  • For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Materials that can be worked
AluminiumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 1,200 N/mm² (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZinc
Applications
Cleaning
Deburring
Roughening
Step-by-step fine grinding
Structuring (matt finishing, brush matting and satin finishing)
Surface work
Drive types
Drive spindle
Flexible shaft drive
Straight grinder

FAST SHIPPING

Fast Australia wide shipping.